Frankston electrician from Streamline Electrical walking to the work ute with a tool bag
Faults and safety

Power out in half the house: United Energy or an electrician?

Half the house has no power. How to tell a tripped circuit from a supply fault, when not to touch the switchboard, and who to ring in Frankston.

  • Licensed & insured
  • Local Frankston Team

Short answer

If some rooms are dead and the rest of the house is normal, a safety switch or circuit breaker has tripped. Check the switchboard and reset it once. If it will not stay on, ring an electrician.

If the lights are dim or flickering, or appliances run weakly, that is partial supply. Do not touch the switchboard or anything metal. Turn off the power points you can reach, unplug appliances and ring United Energy on 132 099.

On this page
  1. Two different faults look the same
  2. Dim or flickering lights: do not touch the switchboard
  3. Ring United Energy on 132 099
  4. When the rest of the house is normal, check the switchboard
  5. Where United Energy’s side ends and yours begins
  6. When United Energy says the fault is on your side
  7. After a storm
  8. When the power comes back
  9. When to ring us

Two different faults look the same

Half a house without power is one of two things. A circuit in the house has switched itself off, or the supply coming into the house is faulty. They need different people, and one of them is dangerous to investigate yourself.

What you see What it usually is Who to ring
Some rooms dead, the rest completely normal, a switch down at the board A tripped safety switch or circuit breaker Reset once. If it trips again, an electrician
Lights dim or flickering, appliances weak or cutting in and out Partial supply or low voltage United Energy, 132 099. Do not touch the switchboard
Some rooms dead, the rest normal, nothing tripped at the board Possibly one phase lost in the street United Energy first
Whole house out, neighbours out too A network outage Check the United Energy outage map
Whole house out, neighbours have power Your main switch, your board or your service line Check the board once, then an electrician
A tingle or shock from a tap or appliance A fault in the supply or the earthing United Energy straight away, then an electrician

Dim or flickering lights: do not touch the switchboard

Most people walk straight to the switchboard. With partial supply, that is the wrong move.

Energy Safe Victoria’s advice for dull or flickering lights, a brown-out, low voltage or partial supply is:

  • do not touch your switchboard or anything metal in your home
  • turn off any power points that are easy to reach and unplug appliances
  • call your electricity distributor immediately.

A fault in the supply can put voltage on metal parts of the house that are normally safe to touch. That is why the advice covers taps and metal fittings, not only the board.

Low or uneven voltage also damages motors and electronics. Unplugging the fridge, the television and the computer protects them until the supply is fixed.

Ring United Energy on 132 099

United Energy is the distributor for Frankston, the Mornington Peninsula and Melbourne’s east and south-east. It owns and maintains the poles and wires. It is not your retailer, and the number is not the one on the front of your bill.

  • Faults and emergencies: 132 099, answered at all hours.
  • Outage map: unitedenergy.com.au/outage-map. Search your suburb or postcode.
  • If your outage is not on the map, report it online or by phone.

Tell them exactly what you see: which rooms, dim or dead, when it started, whether the neighbours are affected.

When the rest of the house is normal, check the switchboard

If the lights that work are at full brightness and nothing is flickering, the fault is almost certainly a tripped circuit.

  1. Ask a neighbour if their power is on.
  2. Go to your meter box. Look for a switch that is down or sitting in the middle.
  3. Push it fully off, then on. Do this once.
  4. If it stays on, you are done. Note what was running when it went.
  5. If it trips again, leave it off.

A switch that will not stay on has found a fault. Our guide to a safety switch that keeps tripping shows how to find the appliance behind it. If it trips with everything unplugged, the fault is in the wiring and it needs fault finding.

Do not touch the switchboard if a storm has damaged it or water has got in. Ring an electrician.

Where United Energy’s side ends and yours begins

The dividing line has a name: the point of supply.

  • Overhead line straight to the house. The point of supply is where the cable connects to the house. United Energy maintains the cable from the street to that connection.
  • Underground supply. The point of supply is where the cable crosses your property boundary.
  • Private poles or lines on your land. They are yours from the first pole on the property.

Everything on your side is your electrical installation. That includes the fitting on the house that the cable attaches to, the cable down to the meter box, the switchboard and all the wiring. Trees on your land that grow around the service line are also yours to clear.

The meter belongs to the distributor.

When United Energy says the fault is on your side

After an outage or a storm, United Energy can restore the street and leave one house off. That happens when its crew finds a defect on the customer’s side. You get a text or an email, and sometimes a written defect notice.

The defects it lists most often are a faulty or damaged switchboard, a damaged or loose point of attachment where the cable meets the house, and trees touching the line.

What happens next:

  1. A licensed electrician repairs the defect.
  2. The electrician issues a Certificate of Electrical Safety and sends it to United Energy.
  3. The electrician arranges the reconnection.
  4. United Energy reconnects the supply. It does not charge for the reconnection once the repair is done.

This is work we do. Ring us with the wording of the notice and we will tell you what the repair involves.

After a storm

  • Stay at least 10 metres from a fallen powerline and anything it is touching. Treat it as live. Ring United Energy on 132 099, or 000 if anyone is in danger.
  • If a branch has pulled the service cable off the house, stay away from it and ring United Energy.
  • Never run a generator into a wall socket or the switchboard.
  • If appliances got wet, do not plug them in until they have been tested.

When the power comes back

Energy Safe Victoria’s order for switching back on is:

  1. Turn off or unplug appliances first.
  2. Turn on the main switch.
  3. Turn on each circuit breaker one at a time.
  4. Press the test button on each safety switch. The power should cut at once. Reset it.

A safety switch that fails the test stays off until an electrician replaces it.

When to ring us

Ring Streamline Electrical when the fault is in the house:

  • a switch at the board will not stay on
  • the whole house is out and the neighbours and the outage map say the street is fine
  • United Energy has told you the defect is on your side
  • there is a burning smell, a scorch mark or a noise at the switchboard.

We run after-hours call-outs for urgent faults across Frankston and the south-east. If it is urgent, ring. Do not send the form.

Sources

Read on 22 November 2026. Rules change. Check the linked page for the current wording.

Common questions

Who is the electricity distributor for Frankston?
United Energy. It runs the poles and wires for Melbourne's east and south-east and the Mornington Peninsula, from Frankston down to Hastings and Portsea. Its faults line is 132 099. Your distributor's name is also printed on your electricity bill.
Do I ring my electricity retailer when the power is out?
No. The retailer sends the bill. The distributor owns the poles and wires and fixes faults and outages. Around Frankston that is United Energy.
Nothing has tripped at the switchboard but half the house is dead. What is it?
It can be a supply problem. Some houses have three-phase power, and losing one phase in the street takes out part of the house while the rest runs normally. Ring United Energy on 132 099 and tell them what is and is not working. If they find the supply is fine, the fault is in the house and you need an electrician.
United Energy says the fault is on my side. What happens now?
They may leave the power off and send a defect notice. A licensed electrician repairs the fault, issues a Certificate of Electrical Safety and arranges the reconnection with United Energy. United Energy reconnects at no charge once the repair is done.
The lights flicker but the power has not gone out. Who do I ring?
It depends on the pattern. One light or one room flickering points to a fitting or a connection in the house, and that is an electrician. Dull or flickering lights across the house, with appliances struggling, is a supply problem. Do not touch the switchboard, and ring United Energy.

What we can do

  • Emergency electrician

    After-hours call-outs for urgent faults across Frankston and the south-east. Ring, do not email.

    Emergency electrician
  • Electrical fault finding

    A circuit that will not stay on, tested and traced to the cause. Fixed diagnosis fee.

    Electrical fault finding
  • Switchboard upgrades

    A damaged or worn-out board replaced, with a safety switch on every circuit.

    Switchboard upgrades

More articles from the blog

Tell us what has no power

Pick any
Your details

Talk to a licensed electrician

Based in Frankston North. Fixed price before we start. After-hours call-outs for urgent faults.