Upgraded switchboard with new circuit breakers at a Langwarrin property
Upgrades

Do you need a switchboard upgrade? The signs, and what the job involves in Victoria

The signs a switchboard needs replacing, when adding safety switches is enough, the inspection Victoria requires, asbestos panels and rebates.

  • Licensed & insured
  • Local Frankston Team

Short answer

Not just because the board is old. You need a new one when it has ceramic fuses, no safety switches, heat damage, or no room for what you want to add. On a sound board with circuit breakers, adding safety switches is often enough.

In Victoria a replaced main switchboard must be inspected by an independent licensed electrical inspector before the power goes back on. We could not find a government rebate for the work.

On this page
  1. The signs
  2. Age on its own is not the test
  3. Add safety switches, or replace the board
  4. Rental properties
  5. Adding an EV charger, induction or solar
  6. What the job involves
  7. The inspection and the certificate
  8. Asbestos in old meter boxes
  9. Who owns what in the meter box
  10. Cost and rebates

The signs

Open the meter box and look. You do not need to touch anything.

  • Ceramic fuses. White porcelain holders with fuse wire inside. A fuse protects the cable from overload. It does nothing when current leaks through a person.
  • No safety switch. A safety switch has a test button and “30mA” printed on it. If nothing on the board has a test button, there is none.
  • One safety switch for the whole house. Any fault anywhere takes out every circuit.
  • No spare spaces. Nothing new can be added.
  • Handwritten or missing labels. Nobody knows what feeds what.
  • Fuses that blow or switches that trip often. United Energy’s advice is that the wiring and appliances should be inspected.

Scorch marks, a burnt smell, a buzz or crackle, or a board that is warm to the touch are not upgrade signs. They are faults. Ring an electrician today.

Age on its own is not the test

A board is not unsafe because it is old. What matters is what protection it has. The year the house was built tells you what to expect.

House built What the board probably has
Before 1991 Fuses or circuit breakers. No safety switch unless one was added later
1991 to 2000 A safety switch on the power circuits. Lighting often unprotected
2001 to 2017 Safety switches on power and lighting circuits
2018 onwards A safety switch on every circuit, including the oven, hot water and air conditioning

Those dates are when safety switches became compulsory in new Victorian homes and major renovations. Plenty of houses around Frankston, Seaford and Carrum Downs were built before the first date and have never had the board touched.

Energy Safe Victoria says the wiring in a house more than 30 years old should be checked. For a house built before the 1980s, it says to have the wiring checked before you move in.

Add safety switches, or replace the board

There are two jobs, and the cheaper one is often enough.

Adding safety switches. If the board already has circuit breakers, is in good condition and has room, a combined safety switch and circuit breaker can be fitted to each circuit. This is non-prescribed work, so it does not need an inspector.

Replacing the board. If the board has ceramic fuses, heat damage or no room, it is replaced. When a board is replaced, the wiring rules require a safety switch on every circuit, including the oven, the hot water and the air conditioning.

We fit an individual device on each circuit either way. A fault in the kitchen then takes out the kitchen, not the house.

Rental properties

For a rental it is not a choice. Since 29 March 2023 the minimum standard requires every power outlet and lighting circuit to be connected to a circuit breaker and a safety switch at the switchboard.

Consumer Affairs Victoria spells out what that means for an old fuse board. The electrician may not be able to add the devices, and the whole board may have to be replaced.

The two-yearly rental safety check is where this usually comes to light. Our guide to the 13 October 2026 change to rental safety checks covers who is caught.

Adding an EV charger, induction or solar

This is a common reason a sound board gets replaced. The new appliance needs its own circuit and the board has no room, or the supply to the house is too small.

The Victorian Government’s electrification guide makes these points:

  • A house does not need three-phase power to go all-electric.
  • Newer homes usually have a single-phase supply of 40 or 63 amps. Older homes may have 25 or 32 amps, and the cable from the street may need upgrading.
  • A larger single-phase supply is often much cheaper than changing to three-phase.
  • A 7 kW car charger can run on a 63 amp single-phase supply. A 22 kW charger needs three-phase.
  • Most induction cooktops need more than 15 amps and their own circuit. Our guide to swapping a gas cooktop for induction has the detail.

Before agreeing to a supply upgrade, ask the electrician for the load calculation. It adds up what the house will draw and shows whether the existing supply can carry it.

United Energy’s own warning is practical. Draw more than the supply allows and the service fuse can blow. The power then stays off until United Energy replaces it.

We look at the board and the supply when we quote an EV charger or an induction cooktop.

What the job involves

  1. Look at the board. On site. We confirm the supply and count the circuits.
  2. Fixed quote. A written price. Anything conditional is named before we start.
  3. Power off. A few hours in the middle of the job, not all day.
  4. New board. New enclosure, main switch and a combined safety switch and circuit breaker on each circuit. Every circuit is traced, tested and labelled.
  5. Inspection. A licensed electrical inspector checks the new board before it is switched on.
  6. Handover. We show you which switch is which and you get the certificate.

Most boards are done in a single visit.

The inspection and the certificate

Replacing a main switchboard is “prescribed” electrical work in Victoria. Three things follow.

  • It must be inspected. An independent licensed electrical inspector has to pass the work. Energy Safe Victoria is explicit that the power cannot go back on to a new main switchboard until that inspection is done. The electrician arranges it.
  • You get a Certificate of Electrical Safety. It records the work and carries the inspector’s sign-off. Under the Electricity Safety Act you receive it within four business days of the inspector’s certificate.
  • It cannot be withheld. An electrician cannot refuse to issue the certificate over a payment dispute.

Check that the inspector who signed the certificate actually came to the property. Keep the certificate with the house papers.

Asbestos in old meter boxes

Many older switchboard and meter panels are made of an asbestos composite. The panels are usually black or dark brown and look like rough board. Brand names include Zelemite and Lebah. Most were installed before 1990. WorkSafe Victoria also lists ceramic fuses in switchboards among the materials that can contain asbestos.

Drilling, cutting or sanding the panel can release fibres. Do not drill into an old meter panel to mount anything, and do not sweep or vacuum dust out of the box.

Only a laboratory test confirms asbestos. If we suspect it, we tell you when we quote, and it is handled to the correct procedure.

Who owns what in the meter box

  • The meter belongs to the electricity distributor or the metering provider.
  • The service fuse is replaced by United Energy.
  • The switchboard, the main switch, the safety switches and all the wiring in the house are yours.

Work on the incoming mains, the main switchboard and the main earth is the inspected kind. Swapping a single circuit breaker or safety switch is not.

Cost and rebates

We do not publish a price because the number depends on what is behind the door: the number of phases, the number of circuits, the condition of the incoming mains and whether there is an asbestos panel. You get a fixed price on site, and it does not change once you accept it.

We could not find a Victorian or federal rebate for a switchboard upgrade as of November 2026. The Victorian Energy Upgrades program discounts the appliances, not the board.

Details of what we install are on the switchboard upgrades page.

Sources

Read on 22 November 2026. Rules change. Check the linked page for the current wording.

Common questions

Do I legally have to upgrade an old switchboard?
Not simply because it is old. It becomes a requirement in a rental, where every power outlet and lighting circuit must be on a circuit breaker and a safety switch. It also becomes necessary when the board is unsafe, or when new work cannot be added to it safely.
Can you just add safety switches to the board I have?
Sometimes. If the board is sound, has circuit breakers and has room, yes. On a ceramic fuse board it usually means replacing the board.
How long is the power off?
Usually a few hours in the middle of the job, not the whole day. Most boards are replaced in a single visit. We tell you roughly when the power goes off so you can plan around the fridge.
Is there a rebate for a switchboard upgrade in Victoria?
We could not find one in November 2026. The Victorian Energy Upgrades program discounts appliances such as heat pumps and induction cooktops. Solar Victoria's rebates are for solar, hot water and batteries. Neither lists switchboards. Programs change, so check before you rely on this.
Who inspects the new switchboard?
A licensed electrical inspector who is independent of the electrician. We book the inspection as part of the job. The power cannot go back on to the new board until it has passed.
How much does a switchboard upgrade cost?
It depends on the number of phases, the number of circuits, whether the incoming mains need replacing and whether there is an asbestos panel. We give a fixed price on site once we have seen the board.

What we can do

  • Switchboard upgrades

    A new board with a safety switch on every circuit. Usually one day, fixed price, certificate in your name.

    Switchboard upgrades
  • Safety switch installation

    Safety switches added to a sound board, circuit by circuit.

    Safety switch installation
  • EV charger installation

    The board and the supply checked before the charger goes in.

    EV charger installation

More articles from the blog

Tell us about the board

Pick any
Your details

Talk to a licensed electrician

Based in Frankston North. Fixed price before we start. After-hours call-outs for urgent faults.